| The EH-2030 Series Rotary Electro-Hydraulic actuator
produces a high amount of torque in a small package with
all electronics built-in. The internal construction assures
a leak-proof and explosion-proof system.
It is ideally suited for 90° rotation for both modulating or on-off control
of ball valves, butterfly valves, plug valves and dampers. This actuator combines
the precision of hydraulic controls with the reliability of spring power for
simplicity of operation.
These actuators are available in the same small package with spring return for
fail-safe to close or open on loss of power.
The EH-2030 accepts an analog command signal to accurately position the actuator
while providing maximum resolution and speed of response. With resolution better
than 0.2% of a degree, the actuator offers superior control when compared to
conventional electric or pneumatic actuators.
| Features |
Specifications |
- Torque: 460 to 4513 in. lbs. (52 to 510 Nm)
- Mounting: above, below or horizontal to valve
- Leak-proof hydraulic system
- 90 degree rotation
- 4-20mA command and feedback
- Automatic Torque limiting
|
- Rotation:90 deg. (set at factory)
- Input Power:110, 120 or 230 Vac, 1Ph., 50/60 Hz
- Speed & Torque: See full specifications
- Temperature Limits: -13F to 167F
- Adjustable Position Switches: 2, 5A, 230 Vac, SPDT
- Automatic Torque Limiting: Explosion-proof pressure
switch. CENELEC approved.
|
|